Install and Download SharePoint 2013 prerequisites offline (manually). SecureInfra Team. Microsoft SQL Server 2008 R2 SP1 Native Client. Deployment guide for Microsoft SharePoint 2013 Preview Microsoft Corporation Published: July 2012 Author: Microsoft Office System and Servers Team ([email protected]) Abstract This book supports a preliminary release of Microsoft SharePoint Server 2013 Preview and provides deployment instructions for SharePoint Server 2013 Preview.
-->Important
If you contact Microsoft Customer Support Services about a production system that does not meet the minimum hardware specifications described in this document, support will be limited until the system is upgraded to the minimum requirements.
Important
Some of the hardware requirement values in this article are based on test results from SharePoint 2010 Products and still apply to SharePoint 2013. This article will be updated with appropriate values and republished when new data becomes available. Hardware requirement values obtained from SharePoint 2010 Products that are listed in this article do not apply to search in SharePoint 2013. > This article links to SharePoint 2010 Products guidance where that guidance is still valid. The SharePoint 2010 Products guidance is not applicable for search in SharePoint 2013 because the search architecture has changed significantly. > The hardware and software requirements in this article refer to physical and virtual servers in a SharePoint farm.
Overview
SharePoint 2013 provides for several installation scenarios. Currently, these installations include single server with built-in database installations, single-server farm installations, and multiple-server farm installations. This article describes the hardware and software requirements for SharePoint 2013 in each of these scenarios.
Hardware and software requirements for other SharePoint 2013 capabilities
If you plan to use capabilities that are offered through SharePoint 2013 or through other integration channels, such as SQL Server or Exchange Server, you also need to meet the hardware and software requirements that are specific to that capability. The following list provides links to hardware and software requirements for some SharePoint 2013 capabilities:
- For eDiscovery, each front-end web server must have the Exchange Web Services Managed API, version 1.2 installed. For more information, see the following articles:
- Hardware requirements for search in SharePoint Server 2013:
Hardware requirements—location of physical servers
Some enterprises have data centers that are located in close proximity to one another and are connected by high-bandwidth fiber optic links. In this environment it is possible to configure the two data centers as a single farm. This distributed farm topology is called a stretched farm. Stretched farms for SharePoint 2013 are supported as of April 2013.
For a stretched farm architecture to work as a supported high-availability solution, the following prerequisites must be met:
- There is a highly consistent intra-farm latency of <1ms one way, 99.9% of the time over a period of ten minutes. (Intra-farm latency is commonly defined as the latency between the front-end web servers and the database servers.)
- The bandwidth speed must be at least 1 gigabit per second.
To provide fault tolerance in a stretched farm, use the standard best practice guidance to configure redundant service applications and databases. For more information, see Create a high availability architecture and strategy for SharePoint Server.
Hardware requirements—web servers, application servers, and single server installations
The values in the following table are minimum values for installations on a single server with a built-in database and for web and application servers that are running SharePoint 2013 in a multiple server farm installation.
For all installation scenarios, you must have sufficient hard disk space for the base installation and sufficient space for diagnostics such as logging, debugging, creating memory dumps, and so on. For production use, you must also have additional free disk space for day-to-day operations. In addition, maintain two times as much free space as you have RAM for production environments. For more information, see Capacity management and sizing for SharePoint Server 2013.
Installation Scenario | Deployment type and scale | RAM | Processor | Hard disk space |
---|---|---|---|---|
Single server with a built-in database or single server that uses SQL Server | Development or evaluation installation of SharePoint Server 2013 or SharePoint Foundation 2013 with the minimum recommended services for development environments. For information, see Minimum recommended services for development environments. | 8 GB | 64-bit, 4 cores | 80 GB for system drive |
Single server with a built-in database or single server that uses SQL Server | Development or evaluation installation of SharePoint Server 2013 or SharePoint Foundation 2013 running Visual Studio 2012 and the minimum recommended services for development environments. For information, see Minimum recommended services for development environments. | 10 GB | 64-bit, 4 cores | 80 GB for system drive |
Single server with a built-in database or single server that uses SQL Server | Development or evaluation installation of SharePoint Server 2013 running all available services. | 24 GB | 64-bit, 4 cores | 80 GB for system drive |
Web server or application server in a three-tier farm | Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013. | 12 GB | 64-bit, 4 cores | 80 GB for system drive |
Hardware requirements—database servers
The requirements in the following table apply to database servers in environments that have multiple servers in the farm.
Note
The requirements listed in this section also apply to SQL Server 2014.
Component | Minimum requirement |
---|---|
Processor | 64-bit, 4 cores for small deployments (fewer than 1,000 users) 64-bit, 8 cores for medium deployments (between 1,000 to 10,000 users) |
RAM | 8 GB for small deployments (fewer than 1,000 users) 16 GB for medium deployments (between 1,000 to 10,000 users) For large deployments over 10,000 users, see the 'Estimate memory requirements' section in Storage and SQL Server capacity planning and configuration (SharePoint Server 2010). This document does not apply to search in SharePoint 2013. These values are larger than those recommended as the minimum values for SQL Server because of the distribution of data that is required for a SharePoint 2013 environment. For more information about SQL Server system requirements, see Hardware and Software Requirements for Installing SQL Server 2008 R2. |
Hard disk | 80 GB for system drive Hard disk space depends on how much content that you have in your deployment. For information about how to estimate the amount of content and other databases for your deployment, see Storage and SQL Server capacity planning and configuration (SharePoint Server 2010). |
Software requirements
![2013 2013](/uploads/1/2/6/3/126355955/177589945.png)
The requirements in the following section apply to the following installations:
- Single server with built-in database
- Server farm with a single server in the farm
- Server farm with multiple servers in the farm
Important
SharePoint 2013 requires a minimum Active Directory domain and forest functional level of Windows Server 2003 (native). For more information about Active Directory functional levels, see Forest and Domain Functional Levels.
Important
SharePoint 2013 does not support single label domain names. For more information, see Information about configuring Windows for domains with single-label DNS names.
The Microsoft SharePoint Products Preparation Tool can assist you in the installation of the software prerequisites for SharePoint 2013. Ensure that you have an Internet connection, because some prerequisites are installed from the Internet. For more information about how to use the Microsoft SharePoint Products Preparation Tool, see Install SharePoint 2013 across multiple servers for a three-tier farm and Install SharePoint 2013 across multiple servers for a three-tier farm.
Note
SQL Server 2014 requires the May 2014 Cumulative Update to be installed. To install the May 2014 Cumulative Update see Updates to SharePoint 2013.
Note
At this time, SQL Server 2016 RTM is not supported.
Minimum software requirements
This section provides minimum software requirements for each server in the farm.
Minimum requirements for a database server in a farm:
Note
SQL Server products and all future public updates and service packs are supported through the SQL Server product lifecycle.
- One of the following:
- The 64-bit edition of Microsoft SQL Server 2012.
- The 64-bit edition of SQL Server 2008 R2 Service Pack 1
- The 64-bit edition of Windows Server 2008 R2 Service Pack 1 (SP1) Standard, Enterprise, or Datacenter or the 64-bit edition of Windows Server 2012 Standard or Datacenter
- The SharePoint parsing process crashes in Windows Server 2008 R2 (KB 2554876)
- FIX: IIS 7.5 configurations are not updated when you use the ServerManager class to commit configuration changes (KB 2708075)
- Hotfix: ASP.NET (SharePoint) race condition in .NET 4.5 RTM:
- Windows Server 2008 R2 SP1 (KB 2759112)
- Windows Server 2012 (KB 2765317)
- Microsoft .NET Framework version 4.5
Minimum requirements for a single server with built-in database:
Note
At this time, Windows Server 2016 RTM is not supported.
- The 64-bit edition of Windows Server 2008 R2 Service Pack 1 (SP1) Standard, Enterprise, or Datacenter or the 64-bit edition of Windows Server 2012 R2 Standard or DatacenterNoteWindows Server 2012 R2 is only supported on a SharePoint Server 2013 Service Pack 1 environment. For additional information about Windows Server 2012 R2 support, see SharePoint 2013 SP1 support in Windows Server 2012 R2.
- The SharePoint parsing process crashes in Windows Server 2008 R2 (KB 2554876)
- FIX: IIS 7.5 configurations are not updated when you use the ServerManager class to commit configuration changes (KB 2708075)
- Hotfix: ASP.NET (SharePoint) race condition in .NET 4.5 RTM:
- Windows Server 2008 R2 SP1 (KB 2759112)
- Windows Server 2012 (KB 2765317)
- The Setup program installs the following prerequisite for a single server with built-in database:
- Microsoft SQL Server 2008 R2 SP1 - Express Edition
- The Microsoft SharePoint Products Preparation Tool installs the following prerequisites for a single server with built-in database:
- Web Server (IIS) role
- Application Server role
- Microsoft .NET Framework version 4.5
- SQL Server 2008 R2 SP1 Native Client
- Microsoft WCF Data Services 5.0
- Microsoft Information Protection and Control Client (MSIPC)
- Microsoft Sync Framework Runtime v1.0 SP1 (x64)
- Windows Management Framework 3.0 which includes Microsoft PowerShell 3.0
- Windows Identity Foundation (WIF) 1.0 and Microsoft Identity Extensions (previously named WIF 1.1)
- Windows Server AppFabric
- Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB 2671763)NoteThe required software above will be supported when used by SharePoint via the SharePoint Product Lifecycle.
Minimum requirements for front-end web servers and application servers in a farm:
Note
At this time, Windows Server 2016 RTM is not supported.
- The 64-bit edition of Windows Server 2008 R2 Service Pack 1 (SP1) Standard, Enterprise, or Datacenter or the 64-bit edition of Windows Server 2012 R2 Standard or Datacenter.NoteWindows Server 2012 R2 is only supported on a SharePoint Server 2013 Service Pack 1 environment. For additional information about Windows Server 2012 R2 support, see SharePoint 2013 SP1 support in Windows Server 2012 R2.
- The SharePoint parsing process crashes in Windows Server 2008 R2 (KB 2554876)
- FIX: IIS 7.5 configurations are not updated when you use the ServerManager class to commit configuration changes (KB 2708075)
- Hotfix: ASP.NET (SharePoint) race condition in .NET 4.5 RTM:
- Windows Server 2008 R2 SP1 (KB 2759112)
- Windows Server 2012 (KB 2765317)
- The Microsoft SharePoint Products Preparation Tool installs the following prerequisites for front-end web servers and application servers in a farm:
- Web Server (IIS) role
- Application Server role
- Microsoft .NET Framework version 4.5
- SQL Server 2008 R2 SP1 Native Client
- Microsoft WCF Data Services 5.0
- Microsoft Information Protection and Control Client (MSIPC)
- Microsoft Sync Framework Runtime v1.0 SP1 (x64)
- Windows Management Framework 3.0 which includes Microsoft PowerShell 3.0
- Windows Identity Foundation (WIF) 1.0 and Microsoft Identity Extensions (previously named WIF 1.1)
- Windows Server AppFabric
- Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB 2671763)
Minimum requirements for client computers
- A supported browser. For more information, see Plan browser support in SharePoint 2013. For information on browsers supported on mobile devices, see Mobile device browsers supported in SharePoint 2013.
Minimum recommended services for development environments
The following are the minimum SharePoint 2013 services and service applications that are recommended for development environments:
- App Management service application
- Central Administration web site
- Claims to Windows Token service (C2WTS)
- Distributed cache service
- Microsoft SharePoint Foundation 2013 Site and Subscription Settings service
- Secure Store Service
- User Profile service application (SharePoint Server 2013 only)
Optional software
The optional software in this section is supported but is not required to install or use SharePoint 2013. This software might be required by capabilities such as business intelligence. For more information about system requirements for other capabilities, see Hardware and software requirements for other SharePoint 2013 capabilities.
Environment | Optional software |
---|---|
Single server with built-in database, front-end web servers, and application servers in a farm | .NET Framework Data Provider for SQL Server (part of Microsoft .NET Framework) .NET Framework Data Provider for OLE DB (part of Microsoft .NET Framework) Workflow Manager You can install Workflow Manager on a dedicated computer. Microsoft SQL Server 2008 R2 Reporting Services Add-in for Microsoft SharePoint Technologies This add-in is used by Access Services for SharePoint Server 2016. Microsoft SQL Server 2012 Data-Tier Application (DAC) Framework 64-bit edition Microsoft SQL Server 2012 Transact-SQL ScriptDom 64-bit edition Microsoft System CLR Types for Microsoft SQL Server 2012 64-bit edition Microsoft SQL Server 2012 with Service Pack 1 (SP1) LocalDB 64-bit edition Microsoft Data Services for the .NET Framework 4 and Silverlight 4 (formerly ADO.NET Data Services) Exchange Web Services Managed API, version 1.2 Microsoft SQL Server 2008 R2 Remote Blob Store which is part of the Microsoft SQL Server 2008 R2 Feature Pack SQL Server 2008 R2 Analysis Services ADOMD.NET KB 2472264 If you are running a geo-distributed deployment and your servers are running Windows Server 2008 R2, then installing KB 2472264 can optimize network latency in a dedicated datacenter network. For more information, and to download the software, see You cannot customize some TCP configurations by using the netsh command in Windows Server 2008 R2. |
Client computer | Windows 7 For information about how to use Windows 7 with SharePoint 2013 in a development environment, see Start: Set up the development environment for SharePoint 2013. Silverlight 3 Office 2016 Microsoft Office 2010 with Service Pack 2 With KB 2553248 Microsoft Office 2007 with Service Pack 2 With KB 2583910 Microsoft Office for Mac 2011 with Service Pack 1 Microsoft Office 2008 for Mac version 12.2.9 Support ends April 9, 2013. |
Links to applicable software
To install Windows Server 2008 R2 SP1, Windows Server 2012, SQL Server, or SharePoint 2013, you can go to the web sites that are listed in this section. You can install most software prerequisites through the SharePoint 2013 Start page. The software prerequisites are also available from web sites that are listed in this section. You can enable the Web Server (IIS) role and the Application Server role in Server Manager.
In scenarios where installing prerequisites directly from the Internet is not possible you can download the prerequisites and then install them from a network share. For more information, see Install prerequisites for SharePoint Server from a network share.
- Hotfix: ASP.NET (SharePoint) race condition in .NET 4.5 RTM:
- Windows Management Framework 3.0 which includes Microsoft PowerShell 3.0
- Microsoft SQL Server 2008 R2 Feature Pack which includes the Microsoft SQL Server 2008 R2 SP1 Native Client and the SQL Server Remote BLOB Store
- Microsoft SQL Server 2008 R2 SP1 Feature pack which includes Microsoft SQL Server 2008 R2 ADOMD.NET
- Microsoft SQL Server 2012 Native Client 64-bit edition - ENUx64sqlncli.MSI
- Microsoft SQL Server 2012 Data-Tier Application (DAC) Framework 64-bit edition - ENUx64dacframework.msi
- Microsoft SQL Server 2012 Transact-SQL ScriptDom 64-bit edition - SQLDOM.msi
- Microsoft System CLR Types for Microsoft SQL Server 2012 64-bit edition - SQLSysClrTypes.msi
- Microsoft SQL Server 2012 with Service Pack 1 (SP1) LocalDB 64-bit edition, which is also a component of SQL Server 2012 with Service Pack 1 (SP1) Express - ENUx64SqlLocalDB.msi
Prerequisite installer operations and command-line options
The SharePoint 2013 prerequisite installer (prerequisiteinstaller.exe) installs the following software, if it has not already been installed on the target server, in this order:
- Microsoft .NET Framework version 4.5
- Windows Management Framework 3.0
- Application Server Role, Web Server (IIS) Role
- Microsoft SQL Server 2008 R2 SP1 Native Client
- Windows Identity Foundation (KB974405)
- Microsoft Sync Framework Runtime v1.0 SP1 (x64)
- Windows Identity Extensions
- Microsoft Information Protection and Control Client
- Microsoft WCF Data Services 5.0
- Windows Server AppFabric
- Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB 2671763)
You can run prerequisiteinstaller.exe at a command prompt with the following options. When you run prerequisiteinstaller.exe at a command prompt, you may be asked to restart the server one or more times during the installation process. After rebooting, you should continue the prerequisite installation by running prerequisiteinstaller.exe with the /continue option.
- /? Display command-line options
- /continue This is used to tell the installer that it is continuing from a restart
- /unattended No user interaction
The installer installs from the file that you specify in the command-line options described in the following list. In this list, < file> signifies the file from which you want to install. If you do not specify the < file> option, the installer downloads the file from the Internet and installs it. If the option does not apply to the current operating system, it is ignored.
- /SQLNCli:< file> Install Microsoft SQL Server 2008 SP1 Native Client from < file>
- /PowerShell:< file> Install Windows Management Framework 3.0 from < file>
- /NETFX:< file> Install Microsoft .NET Framework version 4.5 from < file>
- /IDFX:< file> Install Windows Identity Foundation (KB974405) from < file>
- /IDFX11:< file> Install Windows Identity Foundation v1.1 from < file>
- /Sync:< file> Install Microsoft Sync Framework Runtime SP1 v1.0 (x64) from < file>
- /AppFabric:< file> Install Windows Server AppFabric from < file> (AppFabric must be installed with the options /i CacheClient,CachingService,CacheAdmin /gac)
- /KB2671763:< file> Install Microsoft AppFabric 1.1 for Windows Server (AppFabric 1.1) from < file>
- /MSIPCClient:< file> Install Microsoft Information Protection and Control Client from < file>
- /WCFDataServices:< file> Install Microsoft WCF Data Services from < file>
Installation options
Certain prerequisites are installed by the prerequisite installer with specific options. Those prerequisites with specific installation options are listed below with the options that are used by the prerequisite installer.
- Windows AppFabric/i CacheClient,CachingService,CacheAdmin /gac
- Microsoft WCF Data Services/quiet
The prerequisite installer creates log files at %TEMP%prerequisiteinstaller.<date>.<time>.log. You can check these log files for specific details about all changes the installer makes to the target computer.
-->Installing prerequisites from an offline location is typically required when the servers on which you want to install SharePoint Server are isolated from the Internet. Even if this is not the case, by installing prerequisites from a central, offline location, you can ensure farm server consistency by installing a well-known and controlled set of images.
Note
The Microsoft SharePoint Products Preparation Tool is a user interface built on PrerequisiteInstaller.exe. The Microsoft SharePoint Products Preparation Tool accepts no user input.
Installer switches and arguments
By using PrerequisiteInstaller.exe with switches and arguments, you control the versions of the required software that are installed and the location from which they are installed.
PrequisiteInstaller.exe accepts single or multiple switch and argument pairs. A switch identifies the prerequisite and the argument specifies the action and the location of the prerequisite.
A switch and argument pair uses the following format:
/switch: <path>
Where:
- /switch is a valid switch to identify a prerequisite. For example, /SQLNCli: is the switch for the Microsoft SQL Server 2012 SP1 Native Client.
- <path> is expressed as the path of a local file or the path of a file share, for example, 'C:foldernamesqlncli.msi' or '<servername><sharename>sqlncli.msi'.
Each switch and its argument are separated by a colon and a space. The argument is enclosed in quotation marks.
The switch and argument pairs can be passed to PrerequisiteInstaller.exe at the command prompt or read from an arguments text file.
Download and combine the SharePoint Server prerequisites on a file share
You can download and combine prerequisites by performing the steps in the following procedures.
To identify prerequisites
- Refer to the article, Hardware and software requirements for SharePoint Server 2016, which lists all the required and optional software for SharePoint Server 2016. Additionally, this article provides the download location for each prerequisite that can be downloaded from the Internet. For hardware and software requirements for SharePoint Server 2019, see Hardware and software requirements for SharePoint Server 2019For the SharePoint 2013 version, see Hardware and software requirements for SharePoint 2013.
- From the command prompt, navigate to the root of the SharePoint Server installation media or folder location.
- At the command prompt, type the following command, and then press Enter:PrerequisiteInstaller.exe /?This displays a list of the command-line options and switches and their corresponding arguments for installing a prerequisite from the command-line.TipTo copy the contents of the active About window to the Clipboard, press Ctrl+C.
- Verify that you have an accurate list of the required software. Compare the output from the prerequisite installer to the list of prerequisites in step 1.
- Download the prerequisites to a computer that has Internet access.
Next, follow these steps to create a central location that you can use for installing SharePoint Server prerequisites on all the farm servers.
To combine prerequisites
- Create a shared folder on a computer that can be accessed by the servers on which the prerequisites will be installed.
- Copy the files that you downloaded from the Internet to the shared folder.
![Tool Tool](/uploads/1/2/6/3/126355955/112281149.jpg)
After you finish creating an available network location for the prerequisites, use the procedure in the following section to install SharePoint Server prerequisites on a server.
Install the SharePoint Server prerequisites at the command prompt
You can install one or more of the prerequisites from the command line using the following procedure.
To install from the command line
- From the Start menu, open the Command Prompt window using the Run as administrator option.
- Navigate to the SharePoint Server source directory.
- Type the prerequisite program switch and corresponding argument for the program that you want to install, and then press Enter, for SharePoint Server 2016, type:PrerequisiteInstaller.exe /SQLNCli:'o16-sf-adminSP_prereqssqlncli.msi'NoteTo install more than one prerequisite, type each switch and argument pair. Be sure to separate each pair by a space, for example: > PrerequisiteInstaller.exe /IDFX:'< path>Windows6.1-KB974405-x64.msu' /sqlncli:'< path>sqlncli.msi' /Sync:'< path>Synchronization.msi'
Install the SharePoint Server prerequisites by using an arguments file
You can install the prerequisites from the file share using an arguments file that consists of switches and corresponding path statements to the programs that have to be installed.
When you run PrerequisiteInstaller.exe with an arguments file, the following happens:
- PrerequisiteInstaller.exe reads the argument file to verify that each switch is valid and that the program identified in the path statement exists.NoteIf you specify an argument, PrerequisiteInstaller.exe ignores the arguments file and processes only the command-line argument.
- PrerequisiteInstaller.exe scans the local system to determine whether any of the prerequisites are already installed.
- PrerequisiteInstaller.exe installs the programs in the argument file and returns one of the following exit codes:
- 0 - Success
- 1 - Another instance of this application is already running
- 2 - Invalid command line parameter
- 1001 - A pending restart blocks installation
- 3010 - A restart is needed
- If a prerequisite requires a restart, a 3010 code is generated and you are prompted to click Finish to restart the system. The behavior of the installer after a 3010 code varies depending on which of the following conditions are true on the computer:
- If the component that requires a restart is already installed on the system, the 3010 code is generated, and the remaining prerequisites are installed. After the last prerequisite is installed, you are prompted to restart the system.
- If the component that requires a restart is installed on the system by PrerequisiteInstaller.exe, the installer generates the 3010 code, and the installation of the remaining prerequisites is skipped. You are prompted to restart the system.After the system restarts, PrerequisiteInstaller.exe starts to run again because the startup file that is created before the restart contains a /continue flag.Multiple components might require you to restart. So PrerequisiteInstaller.exe might have to be restarted several times. After you restart, PrerequisiteInstaller.exe ignores the arguments file and attempts to download and install the remaining prerequisites from the Internet. For more information, see Known issues.
Use the following procedure to create an arguments file.
To create an arguments file
- Using a text editor, create a new text document named PrerequisiteInstaller.Arguments.txt. Save this file to the same location as PrerequisiteInstaller.exe. This file will contain the switches and arguments that are used when you run the Microsoft SharePoint Products Preparation Tool.
- Using a text editor, edit PrerequisiteInstaller.Arguments.txt and provide file paths to the installation source for each prerequisite switch by using the following syntax:/switch: <path>Where /switch is a valid switch and <path> is a path of the installation source.
- After you finish editing PrerequisiteInstaller.Arguments.txt, save your edits, and verify that this file is in the same directory as PrerequisiteInstaller.exe.
Use the following procedure to install the prerequisites.
To install the prerequisites using an arguments file
- Run PrerequisiteInstaller.exe at the command prompt to install the prerequisites.CautionIf you are prompted to click Finish to restart the system, do not do so. Instead, click Cancel. For more information, see Known issues before you continue with the next step.
- Manually restart the system.
- At the command prompt, type the following command, and then press Enter:PrerequisiteInstaller.exe
Known issues
There are two known issues that affect the use of an arguments file:
- Using line breaks in the arguments fileIf you create an arguments file and use line breaks to put each switch and argument on a separate line, the prerequisite installer fails. The workaround is to enter all the switch and argument pairs on a single line.
- After a computer restart, the arguments file is not usedAfter you restart, PrerequisiteInstaller.exe runs the startup command file, which contains a /continue flag. The /continue flag forces the installer to ignore the arguments file.You must prevent a restart by deleting the startup task in this command file by using one of the following options:Option 1
- Run PrerequisiteInstaller.exe by double-clicking it. The program will display the first screen with the list of prerequisites.
- Click Cancel. PrerequisiteInstaller.exe deletes the startup task.Option 2
- From the Start menu, choose Run, and then type regedit to open the registry.
- Open the key HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionExplorerShell Folders.
- Check the value for 'Common Startup'. This shows the directory where the startup tasks are listed.
- Close the registry editor without making any changes.
- Navigate to the startup directory, which is usually <systemdir>ProgramDataMicrosoftWindowsStart MenuProgramsStartup.
- Delete the startup task by deleting 'SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd'.